Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

Paint Rectification

3M™ 9 Micron Abrasive Discs 260L

Small Defects: Step 1 (hand or machine options)

By Hand: Remove defect using 3M™ 9 Micron Abrasive Discs 260L (00127).

OR

3M™ Perfect-it™ III Microfinishing 260L

By Machine: using 3M™ Perfect-it™ III Microfinishing 260L 76mm P1500 (00907).

OR

Perfect-it™ Denibbing System (50666)

By Machine: using 3M™ Perfect-it™ Denibbing System (50666).

Printable Paint Rectification Process Board

 
3M™ Trizact™ Fine Finishing Abrasive Discs

Small Defects: Step 2

Use 3M™ Trizact™ Fine Finishing Abrasive Discs P3000 76mm (50415) over the area to speed up polishing time.

Printable Paint Rectification Process Board

 
Excess defects are removed by using 3M™ 260L Fine Finishing Discs

Large Defects: Step 1

Excess defects are removed by using 3M™ 260L Fine Finishing Discs P1200/1500 (50239/50238). Use with 3M™ Hookit™ Soft Interface Pad (05774).

Printable Paint Rectification Process Board

 
3M™ Trizact™ Microfinishing Discs P3000 150mm (50414) on a dampened panel to refine the sanding scratches

Large Defects: Step 2

Use 3M™ Trizact™ Microfinishing Discs P3000 150mm (50414) on a dampened panel to refine the sanding scratches. This will reduce risk of rework due to finish ‘dropping back’.

Printable Paint Rectification Process Board

 

For more information or to discuss your specific requirements Contact Us